Fullmark
Now:
Homepage
/
News
Jiangsu Fullmark Chemicals Co., Ltd. participated in 2010 JEC
Jiangsu

JPEC (Journals and Exhibitions on Composites) was founded in 1963 by the Jec Group. It has been held for 45 years since 2009. It is a comprehensive event for the academic and product exhibition of composite materials around the world. It has a great influence in the world and basically reflects the technology and application achievements of the composite material industry in the world today. It has become a professional exhibition of the composite material industry with a long history and a large scale.
JEC Composites brings together raw material manufacturers, equipment suppliers, distributors, processors and users in all user sectors such as aerospace, automotive, Marine and so on.
The exhibits include production technology and equipment of FRP/composite materials; FRP/composite materials are used in anti-corrosion engineering, construction engineering, automobile and other vehicles, boats, aerospace, machinery, electronics, agriculture and forestry, fishery, sports equipment, daily life and other fields of new products, new design and application; Environmental protection, energy saving, recycling technology and equipment; FRP/composite material quality and control; Metal and ceramic matrix composite products and technology.
The 46th JEC Composites Exhibition was held on April 13, 2010 at the Paris Expo Porte de Versailles, France. According to the website of the organizer, more than 1000 companies in the composite materials industry from all over the world set up booths in this JEC Composites Exhibition. Among them, 56 research and design companies, manufacturers and distributors from China participated in the exhibition. A total of 27,500 professionals from the composite materials industry visited the JEC during the three-day exhibition.
Jiangsu Fuling Chemical Co., Ltd. set up a 30-square-meter booth in JEC this year, which is the return of Jiangsu Fuling Chemical Co., Ltd. to participate in JEC after a gap of 10 years. In 1999 and 2000, the parent company of Jiangsu Fuling Chemical Co., Ltd. before the joint venture -- Jiangsu Fuli Chemical Group Co., Ltd. participated in the 34th and 35th consecutive JEC sessions as one of the earliest enterprises in China's composite material industry to participate in JEC. During the second session of the exhibition, President Xu Peisheng and General Manager Zhai Jiye of Jiangsu Fuli Chemical Group Company visited Ashland Chemical Company of the United States, DSM BP of the Netherlands, The United States Reichhold Company (Reichhold) and the United Kingdom Scott Bader Group (Scott Bader) and other well-known enterprises in the world unsaturated polyester resin industry, exchange the development of their own enterprises to enhance mutual understanding. By the exhibition, the composites industry present situation and development trend of world at that time have more comprehensive understanding, see the gap between China and the world's advanced level, we deeply feel the composite materials in China only by ongoing technological innovation, to adopt new technology, new technology, the enterprise and stronger, bigger, can we truly towards the international market, especially the European and American markets. After ten years of hard work, Jiangsu Fuling Chemical Co., Ltd. successfully completed the construction and relocation of the new factory, with 80,000 tons of capacity, DCS control and ERP management system, appeared on the JEC booth again with a new posture!
During this JEC exhibition, many people and merchants from various countries visited, inquired and negotiated the booth of Jiangsu Fuling Chemical Co., Ltd., and achieved good results. Some composite material manufacturers from developing countries plan to invest in the construction of unsaturated polyester resin plants in their own countries, and have contacted Jiangsu Fuling Chemical Co., Ltd. to discuss the way of cooperation.

MORE

JPEC (Journals and Exhibitions on Composites) was founded in 1963 by the Jec Group. It has been held for 45 years since 2009. It is a comprehensive event for the academic and product exhibition of composite materials around the world. It has a great influence in the world and basically reflects the technology and application achievements of the composite material industry in the world today. It has become a professional exhibition of the composite material industry with a long history and a large scale.
JEC Composites brings together raw material manufacturers, equipment suppliers, distributors, processors and users in all user sectors such as aerospace, automotive, Marine and so on.
The exhibits include production technology and equipment of FRP/composite materials; FRP/composite materials are used in anti-corrosion engineering, construction engineering, automobile and other vehicles, boats, aerospace, machinery, electronics, agriculture and forestry, fishery, sports equipment, daily life and other fields of new products, new design and application; Environmental protection, energy saving, recycling technology and equipment; FRP/composite material quality and control; Metal and ceramic matrix composite products and technology.
The 46th JEC Composites Exhibition was held on April 13, 2010 at the Paris Expo Porte de Versailles, France. According to the website of the organizer, more than 1000 companies in the composite materials industry from all over the world set up booths in this JEC Composites Exhibition. Among them, 56 research and design companies, manufacturers and distributors from China participated in the exhibition. A total of 27,500 professionals from the composite materials industry visited the JEC during the three-day exhibition.
Jiangsu Fuling Chemical Co., Ltd. set up a 30-square-meter booth in JEC this year, which is the return of Jiangsu Fuling Chemical Co., Ltd. to participate in JEC after a gap of 10 years. In 1999 and 2000, the parent company of Jiangsu Fuling Chemical Co., Ltd. before the joint venture -- Jiangsu Fuli Chemical Group Co., Ltd. participated in the 34th and 35th consecutive JEC sessions as one of the earliest enterprises in China's composite material industry to participate in JEC. During the second session of the exhibition, President Xu Peisheng and General Manager Zhai Jiye of Jiangsu Fuli Chemical Group Company visited Ashland Chemical Company of the United States, DSM BP of the Netherlands, The United States Reichhold Company (Reichhold) and the United Kingdom Scott Bader Group (Scott Bader) and other well-known enterprises in the world unsaturated polyester resin industry, exchange the development of their own enterprises to enhance mutual understanding. By the exhibition, the composites industry present situation and development trend of world at that time have more comprehensive understanding, see the gap between China and the world's advanced level, we deeply feel the composite materials in China only by ongoing technological innovation, to adopt new technology, new technology, the enterprise and stronger, bigger, can we truly towards the international market, especially the European and American markets. After ten years of hard work, Jiangsu Fuling Chemical Co., Ltd. successfully completed the construction and relocation of the new factory, with 80,000 tons of capacity, DCS control and ERP management system, appeared on the JEC booth again with a new posture!
During this JEC exhibition, many people and merchants from various countries visited, inquired and negotiated the booth of Jiangsu Fuling Chemical Co., Ltd., and achieved good results. Some composite material manufacturers from developing countries plan to invest in the construction of unsaturated polyester resin plants in their own countries, and have contacted Jiangsu Fuling Chemical Co., Ltd. to discuss the way of cooperation.

Jiangsu Fullmark rights protection and counterfeiting finally settled
Jiangsu
In February 2007, Unsaturated polyester resin fiberglass industry in northeast China, even the whole China industry report incidences dragonfly FRP materials plant in shenyang (later renamed the shenyang jie cheng composites agencies) in liaoning star co., LTD., the production of resin composite materials of fake fu ling jiangsu chemical co., LTD. "rich" brand resin to sell to the national key project - liaoning dahuofang water conveyance project (phase ii) After more than three years of litigation, the dust is finally settled! On March 25, 2010, the Liaoning Provincial Higher People's Court made the following judgment in Civil Judgment (2010) Liao Min San Zhongzi No. 29: "The appeal is rejected and the original judgment is upheld. The processing fee of the second instance case is 2300 yuan, which shall be borne by the appellant (defendant in the first instance) Shenyang Jiezhicheng Composite Materials Agency. This judgment is final."
Here's how the case went: In December 2006, Panjin Branch of Tianjin Tianlian Composite Material Co., Ltd. (hereinafter referred to as Tianjin Tianlian Company) won the bid for Panjin Section of Liaoning Dahuofang Water Transmission Project (Phase II). The project owner clearly stipulates that the raw materials used in the project must be the resins of four well-known enterprises, including Jiangsu Fuling Chemical Co., Ltd. (hereinafter referred to as "Fuling Company") designated by the owner.
After the project started, Fuling Company signed a supply contract with Panjin Branch of Tianjin Tianlian Company to supply FL-F889 o-benzene structure layer unsaturated winding resin and FL-518 m-benzene lining layer unsaturated winding resin. At the same time of each shipment, Fuling Company shall inform the project supervision unit of the brand number, quantity and production batch number of each batch of goods by written fax in time for inspection.
On February 12, 2007, the site supervision personnel of Shanghai Tongji University, the project supervision unit, found that Panjin Branch of Tianjin Tianlian Company had imported 150 barrels (33 tons) of FL-F889 unsaturated resin with the certificate of Fuling Company, but did not receive a written fax from Fuling Company, so they confirmed to Fuling Company. The Fuling Company did not deliver the goods to the Panjin Branch of Tianjin Tianlian Company in that month, and decided that there was a counterfeit, so it reported to the Panjin Administration for Industry and Commerce on February 13. The Panjin Industrial and Commercial Bureau went to the warehouse of Tianjin Tianlian Panjin Branch Company on the afternoon of February 14 to seal this batch of counterfeit products. The 98 barrels that had been used were removed, and the remaining 52 barrels were shipped back by the Panjin Industrial and Commercial Bureau and sealed in the bureau's compound.
After being identified by Panjin Industrial and Commercial Bureau, the 33 tons of resin is Shenyang Longfei FRP Material Factory (hereinafter referred to as Longfei Material Factory, Changed its name to shenyang after the legal representative of the composite material of faithful agencies) to her husband as a legal representative of the liaoning superstar composite materials co., LTD. (hereinafter referred to as "star company") in the production of unsaturated polyester resin fake fu ling company "rich" brand resin to sell to tianjin tianlian file company branch is used for the water conveyance project of dahuofang.
On December 21, 2007, Panjin Municipal Administration for Industry and Commerce issued the Decision on Administrative Punishment of Pan Industry and Commerce Branch No. (2007) 061, confirming that Longfei Materials Factory had infringed upon the facts and should bear the tort liability, impose a fine and compensate Fuling Company for the economic losses. Longfei material factory to Panjin City Industrial and Commercial Bureau penalty decision not to the reason such as written to the Panjin City Intermediate People's Court filed an administrative lawsuit.
Panjin intermediate people's court trial think in 2009, is the Ministry of Commerce and industry penalty for illegal by the people's court for canceling undelivered, program, but tianjin tianlian company parties record record, industrial and commercial personnel on-site inspection, examination and seized goods photo archive materials to justify dragonfly factory (i.e., jie cheng agencies) exist infringement facts, Judgment Longfei material factory (namely, Jie Cheng agency) to compensate for the economic losses of the company.
Jie Cheng agency refused to accept the Panjin City Court's judgment, to the Liaoning Provincial High People's Court to appeal. The provincial high court formed a collegial panel in accordance with the law and held a public hearing. The court thinks, panjin then find out the basic facts are correct, jie cheng agencies of knowingly sell to tianjin tianlian file company branch of the resin is produced by the star
MORE
In February 2007, Unsaturated polyester resin fiberglass industry in northeast China, even the whole China industry report incidences dragonfly FRP materials plant in shenyang (later renamed the shenyang jie cheng composites agencies) in liaoning star co., LTD., the production of resin composite materials of fake fu ling jiangsu chemical co., LTD. "rich" brand resin to sell to the national key project - liaoning dahuofang water conveyance project (phase ii) After more than three years of litigation, the dust is finally settled! On March 25, 2010, the Liaoning Provincial Higher People's Court made the following judgment in Civil Judgment (2010) Liao Min San Zhongzi No. 29: "The appeal is rejected and the original judgment is upheld. The processing fee of the second instance case is 2300 yuan, which shall be borne by the appellant (defendant in the first instance) Shenyang Jiezhicheng Composite Materials Agency. This judgment is final."
Here's how the case went: In December 2006, Panjin Branch of Tianjin Tianlian Composite Material Co., Ltd. (hereinafter referred to as Tianjin Tianlian Company) won the bid for Panjin Section of Liaoning Dahuofang Water Transmission Project (Phase II). The project owner clearly stipulates that the raw materials used in the project must be the resins of four well-known enterprises, including Jiangsu Fuling Chemical Co., Ltd. (hereinafter referred to as "Fuling Company") designated by the owner.
After the project started, Fuling Company signed a supply contract with Panjin Branch of Tianjin Tianlian Company to supply FL-F889 o-benzene structure layer unsaturated winding resin and FL-518 m-benzene lining layer unsaturated winding resin. At the same time of each shipment, Fuling Company shall inform the project supervision unit of the brand number, quantity and production batch number of each batch of goods by written fax in time for inspection.
On February 12, 2007, the site supervision personnel of Shanghai Tongji University, the project supervision unit, found that Panjin Branch of Tianjin Tianlian Company had imported 150 barrels (33 tons) of FL-F889 unsaturated resin with the certificate of Fuling Company, but did not receive a written fax from Fuling Company, so they confirmed to Fuling Company. The Fuling Company did not deliver the goods to the Panjin Branch of Tianjin Tianlian Company in that month, and decided that there was a counterfeit, so it reported to the Panjin Administration for Industry and Commerce on February 13. The Panjin Industrial and Commercial Bureau went to the warehouse of Tianjin Tianlian Panjin Branch Company on the afternoon of February 14 to seal this batch of counterfeit products. The 98 barrels that had been used were removed, and the remaining 52 barrels were shipped back by the Panjin Industrial and Commercial Bureau and sealed in the bureau's compound.
After being identified by Panjin Industrial and Commercial Bureau, the 33 tons of resin is Shenyang Longfei FRP Material Factory (hereinafter referred to as Longfei Material Factory, Changed its name to shenyang after the legal representative of the composite material of faithful agencies) to her husband as a legal representative of the liaoning superstar composite materials co., LTD. (hereinafter referred to as "star company") in the production of unsaturated polyester resin fake fu ling company "rich" brand resin to sell to tianjin tianlian file company branch is used for the water conveyance project of dahuofang.
On December 21, 2007, Panjin Municipal Administration for Industry and Commerce issued the Decision on Administrative Punishment of Pan Industry and Commerce Branch No. (2007) 061, confirming that Longfei Materials Factory had infringed upon the facts and should bear the tort liability, impose a fine and compensate Fuling Company for the economic losses. Longfei material factory to Panjin City Industrial and Commercial Bureau penalty decision not to the reason such as written to the Panjin City Intermediate People's Court filed an administrative lawsuit.
Panjin intermediate people's court trial think in 2009, is the Ministry of Commerce and industry penalty for illegal by the people's court for canceling undelivered, program, but tianjin tianlian company parties record record, industrial and commercial personnel on-site inspection, examination and seized goods photo archive materials to justify dragonfly factory (i.e., jie cheng agencies) exist infringement facts, Judgment Longfei material factory (namely, Jie Cheng agency) to compensate for the economic losses of the company.
Jie Cheng agency refused to accept the Panjin City Court's judgment, to the Liaoning Provincial High People's Court to appeal. The provincial high court formed a collegial panel in accordance with the law and held a public hearing. The court thinks, panjin then find out the basic facts are correct, jie cheng agencies of knowingly sell to tianjin tianlian file company branch of the resin is produced by the star
The training course on design and manufacturing technology of FRP sand pipe was successfully concluded
The
On November 12, 2010, the 5-day training course on design and manufacturing technology of FRP sand pipe was successfully concluded in Changzhou, Jiangsu Province. Zhang Linwen, executive deputy director of the National Center for Quality Supervision and Inspection of FRP Products, Hu Zhongyong, secretary general of the National Technical Committee for Standardization of Fiberreinforced Plastics, Dr. Chen Jianzhong from Wuhan University of Technology and other FRP industry experts attended and gave lectures. Yin Zheng, secretary general of FRP Branch of Chinese Society of Ceramics, hosted the lectures. A total of 48 people from related enterprises, research institutes and universities participated in the training.
This training aims to improve the professional skills of professional technical personnel of FRP sand pipe and the technical level of sand pipe company. The content mainly involves the preparation of GB/T 21238-2007 standard of FRP sand pipe, the structure design, material design, process design and the application of design software of FRP sand pipe. Inspection management of water pipe products and quality control and construction technology of FRP sand pipe.
First of all, Hu Zhongyong, secretary general of the National Technical Committee for Standardization of Fiber-Reinforced Plastics, gave a detailed explanation on the establishment of the fiberglass reinforced plastic sand pipe GB/T 21238-2007. After briefly describing the background, purpose, process and acquisition of national standard, it focuses on the specific content of the standard provisions. For raw materials such as reinforced materials, resin and the properties of granular materials and the size of the sand glass steel tube and barcol hardness and resin unsolvable contents, straight pipe, initial wall components in mechanical properties, long-term performance and health performance and test methods, test rules, packaging, transportation and storage of the professional interpretation and description, Make the trainee understand GB/T 21238-2007 more thoroughly.
Dr. Chen Jianzhong from Wuhan University of Technology introduced the purpose, content, effect, structural resistance, structural design method and composite material design foundation and design of buried glass fiber reinforced plastic sand pipe structure design for water supply and drainage engineering The design content, design formula and the advantages and disadvantages of the design and the FRP pipeline structure design basis, design content, pipeline performance parameters, the role of the pipeline, structural design calculation, construction provisions, safety factor and so on were explained in detail, and enumerated the examples, the site demonstration.
Zhai Jiye, General Manager of Jiangsu Fuling Chemical Co., Ltd., gave a brief introduction on the production status and development trend of FRP sand pipe, which closely followed the hot topics of The Times and was wonderful and vivid.
Ma Yuequn, deputy general manager of Jiangsu Fuling Chemical Co., Ltd., discussed the selection of unsaturated polyester resin for glass fiber reinforced plastic sand pipe, the connotation, characteristics, classification, production process of unsaturated polyester resin and the production status of unsaturated polyester resin in China. The selection of resin for lining layer and structure layer as well as the detection of resin before use are described in detail. The technology, performance index and problems needing attention of selection of unsaturated polyester resin for glass fiber reinforced plastic sand pipe are described.
Hebei HaoHua like glass reinforced plastics co., LTD., the chief engineer wang lei is of pipeline design, the manufacture technology of glass fiber reinforced plastic sand process design connotation and status, to the requirements of the process management principle, method, and the main problems existing are introduced in detail, and the typical problems in sand glass steel pipe production carried on the thorough analysis.
Mr. Li Guoshu, General Manager of Jiyuan Technology Co., Ltd., Shijiazhuang Development Zone, Hebei Province, introduced the characteristics of precision, computerization and automation of modern FRP pipeline design technology, reviewed the development process and characteristics of FRP pipeline design software, and listed the specific situation and applicability of FRPCAD pipeline design software series. The design software of GB21238 version winding pipe, GB21492 version pipe jacking design software and pipe fittings design software are demonstrated on site. The problems needing attention in the concrete operation are explained in detail.
National glass fiber reinforced plastic products quality supervision inspection center executive deputy director Zhang Linwen to the relevant situation of water pipeline product inspection management made in-depth interpretation. From the definition of quality inspection, work principles and basic key po
MORE
On November 12, 2010, the 5-day training course on design and manufacturing technology of FRP sand pipe was successfully concluded in Changzhou, Jiangsu Province. Zhang Linwen, executive deputy director of the National Center for Quality Supervision and Inspection of FRP Products, Hu Zhongyong, secretary general of the National Technical Committee for Standardization of Fiberreinforced Plastics, Dr. Chen Jianzhong from Wuhan University of Technology and other FRP industry experts attended and gave lectures. Yin Zheng, secretary general of FRP Branch of Chinese Society of Ceramics, hosted the lectures. A total of 48 people from related enterprises, research institutes and universities participated in the training.
This training aims to improve the professional skills of professional technical personnel of FRP sand pipe and the technical level of sand pipe company. The content mainly involves the preparation of GB/T 21238-2007 standard of FRP sand pipe, the structure design, material design, process design and the application of design software of FRP sand pipe. Inspection management of water pipe products and quality control and construction technology of FRP sand pipe.
First of all, Hu Zhongyong, secretary general of the National Technical Committee for Standardization of Fiber-Reinforced Plastics, gave a detailed explanation on the establishment of the fiberglass reinforced plastic sand pipe GB/T 21238-2007. After briefly describing the background, purpose, process and acquisition of national standard, it focuses on the specific content of the standard provisions. For raw materials such as reinforced materials, resin and the properties of granular materials and the size of the sand glass steel tube and barcol hardness and resin unsolvable contents, straight pipe, initial wall components in mechanical properties, long-term performance and health performance and test methods, test rules, packaging, transportation and storage of the professional interpretation and description, Make the trainee understand GB/T 21238-2007 more thoroughly.
Dr. Chen Jianzhong from Wuhan University of Technology introduced the purpose, content, effect, structural resistance, structural design method and composite material design foundation and design of buried glass fiber reinforced plastic sand pipe structure design for water supply and drainage engineering The design content, design formula and the advantages and disadvantages of the design and the FRP pipeline structure design basis, design content, pipeline performance parameters, the role of the pipeline, structural design calculation, construction provisions, safety factor and so on were explained in detail, and enumerated the examples, the site demonstration.
Zhai Jiye, General Manager of Jiangsu Fuling Chemical Co., Ltd., gave a brief introduction on the production status and development trend of FRP sand pipe, which closely followed the hot topics of The Times and was wonderful and vivid.
Ma Yuequn, deputy general manager of Jiangsu Fuling Chemical Co., Ltd., discussed the selection of unsaturated polyester resin for glass fiber reinforced plastic sand pipe, the connotation, characteristics, classification, production process of unsaturated polyester resin and the production status of unsaturated polyester resin in China. The selection of resin for lining layer and structure layer as well as the detection of resin before use are described in detail. The technology, performance index and problems needing attention of selection of unsaturated polyester resin for glass fiber reinforced plastic sand pipe are described.
Hebei HaoHua like glass reinforced plastics co., LTD., the chief engineer wang lei is of pipeline design, the manufacture technology of glass fiber reinforced plastic sand process design connotation and status, to the requirements of the process management principle, method, and the main problems existing are introduced in detail, and the typical problems in sand glass steel pipe production carried on the thorough analysis.
Mr. Li Guoshu, General Manager of Jiyuan Technology Co., Ltd., Shijiazhuang Development Zone, Hebei Province, introduced the characteristics of precision, computerization and automation of modern FRP pipeline design technology, reviewed the development process and characteristics of FRP pipeline design software, and listed the specific situation and applicability of FRPCAD pipeline design software series. The design software of GB21238 version winding pipe, GB21492 version pipe jacking design software and pipe fittings design software are demonstrated on site. The problems needing attention in the concrete operation are explained in detail.
National glass fiber reinforced plastic products quality supervision inspection center executive deputy director Zhang Linwen to the relevant situation of water pipeline product inspection management made in-depth interpretation. From the definition of quality inspection, work principles and basic key po
Review of the development of unsaturated polyester resin industry in China during the "eleventh five-year plan" and the prospect of development during the "twelfth five-year plan"
Review
The Eleventh Five-Year Plan (2006-2010) is listed as the 11th Five-Year Plan of New China, but strictly speaking, in the sense of "planning", it should be counted as "the first". Because, before ten, all are "five year plan". The transformation from planning to planning has also become another historical coordinate in the process of transformation from planned economy to market economy.

2010 is the last year of the 11th Five-Year Plan. According to the official data, China's GDP growth rate from 2006 to 2008 was 11.6%, 13% and 9.6% respectively. In 2009, despite the severe impact of the global financial crisis, the GDP growth rate was still as high as 9.1% due to the effective macro-control policies and measures of the central government. China's GDP grew by 10.3% year on year in 2010. The grand goal of building a well-off society in an all-round way got off to a good start.

Review of the development of unsaturated polyester resin industry in China during the eleventh five-year plan
According to the statistics of China Composites Industry Association (including the output of resin manufacturers of non-member units), during the "11th Five-Year Plan" period, the output of unsaturated polyester resin in China increased from 850,000 tons in 2005 to 1.5 million tons in 2010 (estimated), with an average annual growth of 12.4%. Although affected by the global financial crisis, but because the central government to expand domestic demand, strengthen infrastructure construction issued the "four trillion yuan investment plan" and "ten industry revitalization plan", so that permeated into the national economy in all areas of the composite material industry benefited a lot, the resin industry quickly recovered growth. It can be said that the five years of the "eleventh five-year plan" is the fastest and best period for the development of China's unsaturated polyester resin industry in the past 40 years since its establishment in the mid-1960s.

Table 1: China's output of unsaturated polyester resin during the "eleventh five-year plan"

Year 2005, 2006, 2007, 2008, 2009, 2010 annual growth (%)

Production (ten thousand tons) 85 110 115 125 132 150 12.4

The annual growth rate % 29.4 4.5 8.7 5.6 13.6

During the "Eleventh Five-Year Plan" period, the development of China's unsaturated polyester resin industry presented four characteristics:
1. The capacity and output have increased greatly, and the product structure has been continuously optimized
* The start-up of large-scale domestic demand and the continuous growth of export have brought a huge market space to the FRP composite industry, and the demand for unsaturated polyester resin has increased greatly. The capacity and output of China's unsaturated polyester resin industry have increased rapidly.
* Independent innovation of glass fiber reinforced plastic composite molding technology upgrading, promote the quality of unsaturated polyester resin products, structure optimization. Due to the development and improvement of China's FRP equipment manufacturing industry, the SMC/BMC mold pressing, winding, pultrusion and other equipment and mold design and manufacturing technology level of Jiangsu, Zhejiang, Hebei, Shandong and other provinces is becoming more and more mature, not only to meet the domestic demand, but also batch export. The development of equipment manufacturing industry has promoted the popularization of mechanized forming technology of FRP composites. In 2009, China's fiber winding tube can production line, centrifugal casting pipeline production line, pultrusion process, SMC/BMC molding process, continuous light plate production line, vacuum introduction process and RTM process and other mechanized forming process has accounted for 66% of the whole FRP composite forming process, the proportion of hand paste forming process has decreased greatly.
* In line with the industrial development, under the organization of China Composite Materials Industry Association, the National Technical Committee for Standardization of Fiber Reinforcement formulated the industrial standard of "Unsaturated Polyester Resin for Mechanical Forming of Fiber-Reinforced Plastics (JC/T1092-2008)" in time, which was implemented on December 1, 2008. The implementation of the standard standardizes the technical standard of unsaturated polyester resin for mechanization molding and promotes the optimization of product structure in the unsaturated polyester resin industry.
2. The consumption of casting type unsaturated polyester resin reinforced by functional fillers increases rapidly
During the period of "11th five-year plan", be faced with polyester handicraft contraction in the international market situation, many companies quickly turned to architectural decoration in domestic and foreign markets, casting artificial stone, stone and quartz industry rapid rise, and gradually mature and improve technology, the veneer to mechanized production lines from mill molding, products widely
MORE
The Eleventh Five-Year Plan (2006-2010) is listed as the 11th Five-Year Plan of New China, but strictly speaking, in the sense of "planning", it should be counted as "the first". Because, before ten, all are "five year plan". The transformation from planning to planning has also become another historical coordinate in the process of transformation from planned economy to market economy.

2010 is the last year of the 11th Five-Year Plan. According to the official data, China's GDP growth rate from 2006 to 2008 was 11.6%, 13% and 9.6% respectively. In 2009, despite the severe impact of the global financial crisis, the GDP growth rate was still as high as 9.1% due to the effective macro-control policies and measures of the central government. China's GDP grew by 10.3% year on year in 2010. The grand goal of building a well-off society in an all-round way got off to a good start.

Review of the development of unsaturated polyester resin industry in China during the eleventh five-year plan
According to the statistics of China Composites Industry Association (including the output of resin manufacturers of non-member units), during the "11th Five-Year Plan" period, the output of unsaturated polyester resin in China increased from 850,000 tons in 2005 to 1.5 million tons in 2010 (estimated), with an average annual growth of 12.4%. Although affected by the global financial crisis, but because the central government to expand domestic demand, strengthen infrastructure construction issued the "four trillion yuan investment plan" and "ten industry revitalization plan", so that permeated into the national economy in all areas of the composite material industry benefited a lot, the resin industry quickly recovered growth. It can be said that the five years of the "eleventh five-year plan" is the fastest and best period for the development of China's unsaturated polyester resin industry in the past 40 years since its establishment in the mid-1960s.

Table 1: China's output of unsaturated polyester resin during the "eleventh five-year plan"

Year 2005, 2006, 2007, 2008, 2009, 2010 annual growth (%)

Production (ten thousand tons) 85 110 115 125 132 150 12.4

The annual growth rate % 29.4 4.5 8.7 5.6 13.6

During the "Eleventh Five-Year Plan" period, the development of China's unsaturated polyester resin industry presented four characteristics:
1. The capacity and output have increased greatly, and the product structure has been continuously optimized
* The start-up of large-scale domestic demand and the continuous growth of export have brought a huge market space to the FRP composite industry, and the demand for unsaturated polyester resin has increased greatly. The capacity and output of China's unsaturated polyester resin industry have increased rapidly.
* Independent innovation of glass fiber reinforced plastic composite molding technology upgrading, promote the quality of unsaturated polyester resin products, structure optimization. Due to the development and improvement of China's FRP equipment manufacturing industry, the SMC/BMC mold pressing, winding, pultrusion and other equipment and mold design and manufacturing technology level of Jiangsu, Zhejiang, Hebei, Shandong and other provinces is becoming more and more mature, not only to meet the domestic demand, but also batch export. The development of equipment manufacturing industry has promoted the popularization of mechanized forming technology of FRP composites. In 2009, China's fiber winding tube can production line, centrifugal casting pipeline production line, pultrusion process, SMC/BMC molding process, continuous light plate production line, vacuum introduction process and RTM process and other mechanized forming process has accounted for 66% of the whole FRP composite forming process, the proportion of hand paste forming process has decreased greatly.
* In line with the industrial development, under the organization of China Composite Materials Industry Association, the National Technical Committee for Standardization of Fiber Reinforcement formulated the industrial standard of "Unsaturated Polyester Resin for Mechanical Forming of Fiber-Reinforced Plastics (JC/T1092-2008)" in time, which was implemented on December 1, 2008. The implementation of the standard standardizes the technical standard of unsaturated polyester resin for mechanization molding and promotes the optimization of product structure in the unsaturated polyester resin industry.
2. The consumption of casting type unsaturated polyester resin reinforced by functional fillers increases rapidly
During the period of "11th five-year plan", be faced with polyester handicraft contraction in the international market situation, many companies quickly turned to architectural decoration in domestic and foreign markets, casting artificial stone, stone and quartz industry rapid rise, and gradually mature and improve technology, the veneer to mechanized production lines from mill molding, products widely
Mountains and rivers again suspected no road, and a village
Mountains
Introduction - the confusion of the endless
Use "Confused! To describe our unsaturated polyester resin industry bosses mood is the most appropriate. In fact, not only the owners of unsaturated polyester resin industry, in the whole of China's small and medium-sized private enterprise owners, how many are not living in "confusion"? This is especially true for chemical companies.
Stricter and stricter policies on safety and environmental protection, stricter and stricter tax policies, higher and higher minimum wage standards, higher and higher product technical standards... All these are pressing down on the original competitiveness of the vast majority of small and medium-sized unsaturated polyester resin production enterprises in China. In addition, the higher and higher threshold of loans, industrial access and so on, makes the living environment of these enterprises change in essence. Move or close? This severe problem has been placed in front of Chinese unsaturated polyester resin business owners. China's unsaturated polyester resin industry is in the historical stage of transformation from the Spring and Autumn Period to the Warring States Period.
In recent years, an important train of thought that local government develops economy is to attract investment. Even in many places, attracting investment has become the only power of local economy. All preferential policies, land, taxes, fees and so on are tilted to the investment promotion and capital introduction enterprise, and at that time, old between enterprise intangible was desolate, so in these business owners in the mind, more or less have some don't balance, some resentment, to some extent, also affect the enthusiasm of their pursuit of long-term development. Doubtless, the long-term development of an area economy, cannot leave input, come from the increment input of external especially, accordingly, the policy of attracting investment that bases itself on economic long-term development is correct undoubtedly, this had been proved by a lot of developed area place. However, investment in the short term, will bring some problems, mainly is the government resources of a large number of tilt, make these companies hire from the outside came in in the short term it cannot contribute to local finance, even in the first two or three years, local government subsidies to the new enterprise, therefore, in terms of sight, the backbone of the local economy, We still need to rely on old enterprises to do support. However, the problem lies in the many problems that these old enterprises have accumulated over the years, especially the historical problems left by chemical enterprises in environmental protection and safety, which can no longer support the sustainable development of these enterprises. The future of old enterprises is not only a problem for enterprises, but also an unavoidable problem for local governments.
Hard Choices
On May 11, 2009, a sudden toxic gas leak from Huangtuxinxing Chemical Plant shocked Jiangyin and quickly spread across the country through the news media and the Internet. This became known as the "511" incident.
After the incident, the local government quickly took all effective measures to reduce the negative impact on the local society, one of which was the strong measures of suspending production for rectification and relocating all chemical plants within a certain time limit. Petition signs are posted in front of every chemical plant. This has been in the vortex of the financial crisis for the chemical plant, is no different from worse. The owners of the chemical plant were suddenly dazed by the blow and did not know what the future was. However, as the town's largest chemical production enterprises, the management of Jiangsu Fuling Chemical Co., Ltd. is very calm, in addition to a round of emergency meetings every day, there is a topic has become a day or even all the time in the enterprise has been repeatedly mentioned ----- to speed up the relocation!
In 2009, as the only chemical enterprise in the city's "retreat from the town into the garden", many people were surprised at the foresight of Fuling Chemical. "511" hit all of Huangto's chemical plants hard, but it led to a turning point. And this turning point, from the relocation of Fuling Chemical has begun.
Debate about the relocation has never stopped before the "511" incident, not only among Huangtu's colleagues, but also within the company of Fuling Chemical. In Jiangyin, although not many people really know the full name of Fuling Chemical Industry, no one knows the chemical plant in Huangtu Triangdi. In recent years, the whirlpool of public opinion has never left the old enterprise with more than 20 years of history. With the outbreak of blue-green algae in Taihu Lake, the management of the enterprise was keenly aware that no matter how hard they tried to continue production at the original site, the road had come to an end. In March 2006, Fuling Chemical filed a formal
MORE
Introduction - the confusion of the endless
Use "Confused! To describe our unsaturated polyester resin industry bosses mood is the most appropriate. In fact, not only the owners of unsaturated polyester resin industry, in the whole of China's small and medium-sized private enterprise owners, how many are not living in "confusion"? This is especially true for chemical companies.
Stricter and stricter policies on safety and environmental protection, stricter and stricter tax policies, higher and higher minimum wage standards, higher and higher product technical standards... All these are pressing down on the original competitiveness of the vast majority of small and medium-sized unsaturated polyester resin production enterprises in China. In addition, the higher and higher threshold of loans, industrial access and so on, makes the living environment of these enterprises change in essence. Move or close? This severe problem has been placed in front of Chinese unsaturated polyester resin business owners. China's unsaturated polyester resin industry is in the historical stage of transformation from the Spring and Autumn Period to the Warring States Period.
In recent years, an important train of thought that local government develops economy is to attract investment. Even in many places, attracting investment has become the only power of local economy. All preferential policies, land, taxes, fees and so on are tilted to the investment promotion and capital introduction enterprise, and at that time, old between enterprise intangible was desolate, so in these business owners in the mind, more or less have some don't balance, some resentment, to some extent, also affect the enthusiasm of their pursuit of long-term development. Doubtless, the long-term development of an area economy, cannot leave input, come from the increment input of external especially, accordingly, the policy of attracting investment that bases itself on economic long-term development is correct undoubtedly, this had been proved by a lot of developed area place. However, investment in the short term, will bring some problems, mainly is the government resources of a large number of tilt, make these companies hire from the outside came in in the short term it cannot contribute to local finance, even in the first two or three years, local government subsidies to the new enterprise, therefore, in terms of sight, the backbone of the local economy, We still need to rely on old enterprises to do support. However, the problem lies in the many problems that these old enterprises have accumulated over the years, especially the historical problems left by chemical enterprises in environmental protection and safety, which can no longer support the sustainable development of these enterprises. The future of old enterprises is not only a problem for enterprises, but also an unavoidable problem for local governments.
Hard Choices
On May 11, 2009, a sudden toxic gas leak from Huangtuxinxing Chemical Plant shocked Jiangyin and quickly spread across the country through the news media and the Internet. This became known as the "511" incident.
After the incident, the local government quickly took all effective measures to reduce the negative impact on the local society, one of which was the strong measures of suspending production for rectification and relocating all chemical plants within a certain time limit. Petition signs are posted in front of every chemical plant. This has been in the vortex of the financial crisis for the chemical plant, is no different from worse. The owners of the chemical plant were suddenly dazed by the blow and did not know what the future was. However, as the town's largest chemical production enterprises, the management of Jiangsu Fuling Chemical Co., Ltd. is very calm, in addition to a round of emergency meetings every day, there is a topic has become a day or even all the time in the enterprise has been repeatedly mentioned ----- to speed up the relocation!
In 2009, as the only chemical enterprise in the city's "retreat from the town into the garden", many people were surprised at the foresight of Fuling Chemical. "511" hit all of Huangto's chemical plants hard, but it led to a turning point. And this turning point, from the relocation of Fuling Chemical has begun.
Debate about the relocation has never stopped before the "511" incident, not only among Huangtu's colleagues, but also within the company of Fuling Chemical. In Jiangyin, although not many people really know the full name of Fuling Chemical Industry, no one knows the chemical plant in Huangtu Triangdi. In recent years, the whirlpool of public opinion has never left the old enterprise with more than 20 years of history. With the outbreak of blue-green algae in Taihu Lake, the management of the enterprise was keenly aware that no matter how hard they tried to continue production at the original site, the road had come to an end. In March 2006, Fuling Chemical filed a formal
Previous page
1
logo

Jiangsu Fullmark Chemicals Co., Ltd. is a sino-foreign joint venture built by Japan Mitsubishi Company, the world famous multinational corporation, and the subordinate company of Jiangsu Fuli Chemical Group Co., Ltd. The company is specialized in the production and sale of unsaturated polyester resin and gel coat.

Contact information

Fax:+86-510-86654791、86052859
Web:
http://www.fullmarkchem.com
Add:No.18, South Jiasheng Road, Shizhuang, Huangtu Town, Jiangyin City, Jiangsu Province

苏ICP备08010833号     Power by 300.cn